Roland DWX-42W Dental Milling Machine

DGSHAPE DWX-42W wet dental milling stroj je najnoviji model koji stiže iz bogatog portfolija Rolandove sjajne DGSHAPE serije. Donosi na scenu dentalne protetike potpunu novu dimenziju pouzdanosti i praktičnosti, te kao takav predstavlja jednu od najboljih solucija za sve zubotehničke laboratorije.

DGSHAPE DWX-42W dental milling stroj kreiran da odgovara potrebama mokrog dental millinga. Krasi ga nevjerovatna preciznost i mogućnost vrhunskih estetskih restoracija. Zahvaljujući Automatic Tool Changeru (ATC) za šest alata, za 50% je brži od svih dosadašnjih generacija uređaja za dental milling, a posebno dizajnirani dvojni filteri traju duže, čime štedi vrijeme i novac.

Njegova posebno dizajnirana osovina zahtijeva manji pritisak (za 50%) i količinu zraka (za 75%), bez žrtvovanja performansi. Ne zahtijeva veliki kompresor, zbog čega je savršen za ambulantno okruženje. Radi s maksimalnom učinkovitošću u okruženju s visokom produkcijom, a njegova otvorena arhitektura omogućava besprijekornu integraciju s postojećim uređajima za skeniranje. Dizajniran je za kombinovanje s DGSHAPE d-CLINIC rješenjem.

Specifikacije modela DWX-42W

Millable material: Glass-ceramics, composite resins, PMMA
Loadable workpiece shape: Width: Maximum 40 mm (1.57 in) / Depth: Maximum 20 mm (0.79 in) / Height: Maximum 20 mm (0.79 in)
Operating speed: 6 to 1,800 mm/min. (0.24 to 70.9 in./min.)
Spindle speed: 15,000 to 60,000 rpm
Rotary axis travel angle: A: ±360°
Number of burs housed: 6
Attachable bur shank diameter: 3 mm, dedicated milling bur
Compatible compressed air: Pressure: 0.18 to 0.3 MPa / Air Capacity: 39L/min or more / Tank Capacity: 33L (8.7gal) or more
Interface: USB, Ethernet (10 BASE-T/100 BASE-TX automatic switching)
Control command set: RML-1, NC code
Power requirements: AC 100 to 240 V ± 10%, 50/60 Hz (overvoltage category II, IEC 60664-1), 2.1 A
Power consumption: Approx. 200 W
Operating noise: During operation : 70 dB(A) or less (when not cutting), During standby: 48 dB(A) or less
External dimensions: Width 19.5 in (495 mm) / Depth 26.0 in (660 mm) / Height 23.6 in (600 mm)
Weight: 61 kg (135 lbs.)
Installation Environment: Indoor use, Altitude: Up to 6,562 ft. (2,000m), Temperature: 41 to 82 °F (5 to 28°C), Humidity: 35 to 80%RH (no condensation), Ambient pollution degree: 2 (as specified by IEC 60664-1), Short-term temporary overvoltage: 1,440 V, Long-term temporary overvoltage: 490 V
Included items: Power cord, USB cable, Dedicated milling burs, Automatic correction jig, Measuring cup, Hexagonal screwdriver, Hexagonal wrench, etc..